file Question Vram: 1.6V and ECC starts after 1375MHz (Hynix)

6 years 8 months ago - 6 years 8 months ago #265 by Tugrul_512bit
Default is 1250 MHz at 1.5V but msi card has increased it to 1.6V and lowered to 1200 MHz. I tested vram for several frequencies versus performance and i got something like:



This graph is same whatever voltage i increase the vram to. Any suggestions and ideas?

Msi afterburners lets only 1450 MHz maximum and it is in the lower minimum. 1625 MHz point is something i made up. But 0-1450 MHz range is from what i experienced. I increase voltage but performance at 1450 MHz never increases and is slower than 1375MHz. .

(Graph values are benchmark-points and MHz. )

I want to add something: a whizzling("bzzzz"/"vrzzzz") sound comes from graphics card or somewhere else in the Allbenchmark-loading(turning gear) part. Could this be coil or capacitor?

Please Log in or Create an account to join the conversation.

6 years 5 months ago #527 by Peter Karlsson
Which graphic's card are you talking about?

On the 7970 the hynix mem is specced for 1600Mhz,

Please Log in or Create an account to join the conversation.

6 years 5 months ago #529 by Tugrul_512bit
I did the test with HD7870 on clbenchmark's fluid test which is 10-seconds long which may be less dangerous B)

Please Log in or Create an account to join the conversation.