× For help and support with ALLBenchmark in general

exclamation-circle Important Beta 18 stops working when cat fires on building

11 lata 3 miesiąc temu #189 przez Garth
Please read OP.

Proszę Zaloguj lub Zarejestruj się, aby dołączyć do konwersacji.

11 lata 3 miesiąc temu #192 przez Michal 'bonzaj' Staniszewski
Hi Garth, Did you try to underclock? Those lasers, are hardcore intensive. Especially raymarching test always heats my GPUs about +10C

Proszę Zaloguj lub Zarejestruj się, aby dołączyć do konwersacji.

11 lata 3 miesiąc temu #201 przez Garth
Just for giggles, I did underclock my card down to 850Mhz. No effect. Still freezes.

Proszę Zaloguj lub Zarejestruj się, aby dołączyć do konwersacji.

11 lata 3 miesiąc temu #202 przez Garth
Just installed Catalyst 13.1. Same issue, freezes in the exact same spot. Soon as it pans to the building with the lazers being shot across it. It freezes, same spot.

Proszę Zaloguj lub Zarejestruj się, aby dołączyć do konwersacji.

11 lata 3 miesiąc temu #204 przez Michal 'bonzaj' Staniszewski
Hi Garth,
Let's try some other things - please turn off the multithreading option in "Options".
Also try to run it in openGL mode.
Cheers!
Michal

Proszę Zaloguj lub Zarejestruj się, aby dołączyć do konwersacji.

11 lata 3 miesiąc temu #205 przez Tugrul_512bit
Hello, i watched MSI-Afterburner for gpu voltage and saw that this benchmark makes gpu use extra 0.03V, this means my gpu's default voltage is 1.218V but while intensive areas this increases to 1.244 V which could be dangerous when you are over 1.3V.

Proszę Zaloguj lub Zarejestruj się, aby dołączyć do konwersacji.